Polyurethane Catalyst Product Catalog

Polyurethane Catalyst Product Catalog

　　American Gas Product Number Company Product Number Product Description

　　Amine catalysts

　　DABCO 33LVR A-33 33% triethylenediamine solution in dipropylene glycol, an industry standard product.

　　DABCOR 1027 1027 Modified triethylenediamine, used in monoethanol polyester and polyether sole stock solution system, can adjust the fiber and demoulding time.

　　DABCO 1028 1028 Modified triethylenediamine, used in 1,4-butanediol polyester and polyether sole stock solution system, can adjust the fiber and demoulding time.

　　DABCO 8154 8154 Delayed-acting triethylenediamine type catalyst, which can improve foam fluidity.

　　DABCO B16 B16 Improves surface curing and is suitable for molding and other self-skinning systems.

　　DABCO BDMA BDMA reduces brittleness and surface curing in high moisture formulations.

　　DABCO BL-11 A-1 70% bis(dimethylaminoethyl) ether solution in dipropylene glycol, “foaming” type catalyst.

　　DABCO BL-17 BL-17 A bis(dimethylaminoethyl) ether derivative with delayed reaction effect.

　　DABCO BL-22 BL-22 complex amine has a strong “foaming” effect and can replace BL-11.

　　DABCO Crystalline Solid Amine Solid triethylenediamine, industry standard product.

　　DABCO CS-90 CS-90 complex amine has a strong “foaming” effect, improves the foam density gradient and the cell opening effect, and can reduce the cracking of the box foam corners.

　　DABCO DC-2R DC-2 Special complex amine, suitable for accelerated curing of hard spray coatings, excellent storage stability.

　　DABCO DMAEE DMAEE is a low odor surface curing catalyst, used together with main base catalysts such as 33LV.

　　DABCO DMDEE DMDEE “Foaming” catalyst, especially suitable for one-component sealing foam, soluble in MDI but not reactive.

　　DABCO DMEA DMEA Mild balanced catalyst with short milky time.

　　DABCO EG EG gel catalyst, 33% triethylenediamine ethylene glycol solution, used in ethylene glycol systems for footwear materials.

　　DABCO NE200 (New) NE200 Special low atomization reaction type “foaming” catalyst.

　　DABCO NE400 (New) NE400 Low odor, special low atomization reaction catalyst, used for polyester foam.

　　DABCO NE500 (New) NE500 Special low atomization reaction type “gelling” catalyst, can greatly reduce odor and atomization.

　　DABCO NE600 (New) NE600 Special low atomization reaction type “foaming” catalyst can greatly reduce odor and atomization.

　　DABCO NE1060 (New) NE1060 Special low atomization reaction type “gelling” catalyst.

　　DABCO S-25 S-25 Gel catalyst, 25% triethylenediamine, 75% 1,4-butanediol mixture.

　　DABCO TT foaming catalyst with low atomization effect, used for packaging materials.

　　DABCO TMR TMR is used in polyisocyanurate (PIR) to accelerate the final cure without affecting the cream time.

　　DABCO TMR-2 TMR-2 is used for polyisocyanurate (PIR), but has a milder reaction and can shorten the demoulding time of rigid foam.

　　DABCO TMR-3 TMR-3 is used for polyisocyanurate (PIR), but it reacts slowly and has a delayed effect.

　　DABCO TMR-4 TMR-4 trimerization catalyst, providing excellent flowability effect.

　　DABCO TMR-30 DMP-30 Tris(dimethylaminomethyl)-2,4,6-phenol basic trimerization catalyst.

　　DABCO XDMTM XDM auxiliary catalyst can improve the surface appearance and curing.

　　POLYCATR5 PC5 is a strong “foaming” catalyst, a standard catalyst for the rigid foam industry, which can improve foam fluidity.

　　POLYCAT8 PC8 Dimethylcyclohexylamine, standard catalyst.

　　POLYCAT9 PC9 tertiary amine, low odor hard catalyst, can replace dimethylcyclohexylamine, especially suitable for hard spray system.

　　POLYCAT12 PC12 Tertiary amine catalyst, less reactive, can increase foam hardness.

　　POLYCAT17 PC17 A balanced, low atomizing catalyst that improves surface cure, particularly suitable for products such as headrests.

　　POLYCAT18 (New) PC-18 Special co-catalyst, delays the start time without affecting the final curing; improves the curing of the upper side of the board.

　　POLYCAT33 PC-33 modified dimethylcyclohexylamine, low odor hard catalyst, industrial standard product.

　　POLYCAT41 PC-41 trimerization catalyst, excellent foaming effect; suitable for various rigid foam systems with high water content, can shorten demoulding time.

　　POLYCAT48 PC48 Special balanced catalyst, can help improve fluidity, improve dimensional stability, especially suitable for low density formulations

　　It can be used alone or in combination with other catalysts.

　　POLYCAT58 PC58 Low odor, surface curing catalyst.

　　POLYCAT77 PC77 Balanced reaction catalyst, excellent cell opening and surface curing effects, can enhance the resilience of molded foam.

　　POLYCAT92 PC92 is a special compound amine with the function of prolonging milkiness and reducing sponge breakage loss. It is suitable for low to high density formulas and is especially suitable for slow rebound.

　　Other Country Product Numbers Company Product Numbers Product Description

　　C-225 C-225 Delayed blow-drying and cross-linking balance, improved flow.

　　PC CAT DBU DBU 1,8-diazabicyclo[5,4,0]undecene-7, strong gel catalyst.

　　SMP SMP complex tertiary amine, increase foam hardness

　　AS-33 AS-33 Modified triethylenediamine, delayed catalyst, molding, box type, soft foam

　　PCCAT NP15 Np15 Bis-(3-dimethylaminopropyl)amino-2-propanolamine, low odor, high resilience

　　DMBA Dimethylbenzylamine

　　ZF-1 low atomization, foaming catalyst, can replace A-1

　　TMEDA Tetramethylethylenediamine Co-catalyst

　　TMPTA Tetramethylpropylenediamine Co-catalyst

　　L-33 low atomization, gel type catalyst, performance can replace A-33

　　NMM N-methylmorpholine, polyurethane fast foam, open cell

　　DMP 1,4-dimethylpiperazine, self-skinning

　　Metal Catalysts

　　DABCO K-15 K-15 70% potassium octanoate solution in diethylene glycol, standard PIR catalyst.

　　DABCO T9 T9 100% stannous octoate, industry standard tin catalyst.

　　DABCO T12 T12 Dibutyltin dilaurate, suitable for coatings or PU resins.

　　DABCO 120 120 Tetravalent tin catalyst, faster and more stable than T-12.